Measurement of diameter and length

Chamfer Gauges

IKT90-1 mit digitaler Messuhr und Funksender
IKT90-1 mit digitaler Messuhr und Funksender
AKT90-1-DI
AKT90-1-DI
DIATEST Chamfer gauge IKT127-1
Chamfer gauge IKT127-1

Indicating measuring instruments for diameter measurement of conical bores, external cones or 45° chamfers

Internal Taper Gauges IKT: measure the largest diameter of a conical bore or a conical groove

  • IKT60 for cone < 60° = Measuring range 0.5 to 121 mm, several instruments needed
  • IKT90 for cone < 60° and > 90°= Measuring range 0.5 to 120 mm, several instruments needed
  • IKT127 for cone < 90° and => 127° = Measuring range 0.5 to 121 mm, several instruments needed
  • Calibration at factory or with setting master.

External Taper Gauges AKT: measure the smallest diameter of an external cone.

  • AKT60 for cone < 60° = Measuring range 5 to 121 mm, several instruments needed
  • AKT90 for cone > 60° and < 90° = Measuring range 5 to 120 mm, several instruments needed
  • AKT127 for cone > 90° and <127° = Measuring range 5 to 120 mm, several instruments needed
  • Calibration at factory or with setting master.

Chamfer Gauges KT resp. KT-B: measure directly a 45° chamfer on rectangular and cylindrical work pieces, even bores and slots.

  • KT: for straight chamfers and external diameters and slots over 16 mm
  • KT-B: For bores from Ø28 mm
  • Calibration at factory (setting master included for standard KT/KT-B)

IKT, AKT, KT and KT-B in standard version with shock protected indicator with a scale graduation of 0,01mm.

All gauges can also be equipped with a digital indicator MUM as an option (scale graduation 0.01mm/.0005“). Not only the standard angles but also any other angle is possible. All measured values can be recorded and transferred wireless (DIAWIRELESS) or via cable.

Economical alternative: Some of the IKT can be manufactured without stop bars (IKT-OS). Special designs on request

Industrie 4.0

Downloads

chamfer gauges Brochure
Chamfer gauges operating instructions