Chamfer Gauge

General

• Measuring surface and hardened steel taper
• Scale graduation of indicators: 0.01 mm
• Calibration at factory or via setting master
• Special designs on request

Internal taper gauge (IKT)

• Direct gauging of major diameter of internal tapers or tapered slots
• Models with 60°, 90° and 127° taper
• Application range: Ø 0.5 mm to 120 mm
• Measuring range: 11.5 mm for 60° taper/19.5 mm for 90° and 127° taper

The low-cost Alternative: The Internal Taper Gauge IKT-OS
 
The term OS is an abbreviation which means “without stop bar”. By the omission of the bar, the alternative internal taper gauge can be manufactured at a lower cost which in turn renders a favourable sales price.
 
The IKT-OS is implemented to measure the largest diameter of internal tapers or tapered grooves. In contrast to its brother product, the IKT-OS requires a contact surface and cannot be used with thin-walled work pieces.
 
Available in the following models:

• IKT90-1-OS Measuring range 0,5-20
• IKT90-2-OS Measuring range 20-40
• IKT60-1-OS Measuring range 0,5-12
• IKT60-2-OS Measuring range 10-21
• IKT127-1-OS Measuring range 0,5-20

 
Standard setting masters can be utilised, as well as the corresponding dial indicator or digital dial indicator IKT-MU1086W.
 
Available on request.

External taper gauge (AKT)

• Direct gauging of minor diameter of external taper
• Models with 60°, 90° and 127° plungers
• Application range: Ø 5 mm to 120 mm
• Measuring range: 11 mm for 60° plunger/19.5 mm for 90° and 127° plunger (except for size 1)

Chamfer gauge (KT/KT-B)

• Direct gauging of 45° chamfers on rectangular and cylindrical pieces, even bores or slots
• Measuring range: chamfers up to 7 mm (radii 1 mm up to 9.5 mm via conversion)
• Chamfers in bores from approx. Ø 28 mm